Heat Pipe Heat Sink for Projector

Projector is set light, mechanical and electrical technology and the integration of high-tech products, from the working principle of the projector, projector can be found at the heart of the components have three systems: optical system, cooling system, electrical system. And optical system as the core, but poor cooling system will cause serious for him to color, brightness, high temperature will affect the service life of projector bulbs, cooling fan noise, the interior of the projector will be affected by temperature.
Projector originating within the light source, computing chips, graphics, etc., many precision electronic components will lead to deformation because of the high heat.Pioneer heat pipe Heat Sink Compared to conventional cooling materials, heat pipe technology can be considered a breakthrough. It can provide high thermal conductivity at small temperature differences.A heat pipe consists of three parts: a sealed hollow tube (usually copper), a wick (or capillary) and a working fluid. In applications, the part of the heat pipe near the heat source is called the evaporative end, and the end near the cold source (such as the fin) and away from the heat source is called the condensing end.Heat pipe will be soldered to aluminum stacked fin and base by reflow oven, then we will run 100% on-line thermal test to ensure the thermal performance.Cooling effect than the traditional air cooling radiator increase more than double, using a projector can maintain the best working temperature, the wind, the wind through the Heat Sink, sealed cover body for optical subject, outside the dust pollution an optical main body, achieve the ideal effect of dust and cooling; Bubble copper its sound absorption characteristics at the same time, can reduce the cooling fan wind noise at work.
                                                                                                                               
As a manufacturer of heat sink in China, Pioneer Thermal is certified with ISO9001, ISO14001 and TS16949, and has more than 18 years experience in CNC machining, cold forging heatsinks, cold plate heatsinks, die casting heatsinks, extrusion heatsinks, heatpipe assemblies, skived fin heatsinks, stacked fin heatsinks, folded fin heatsinks etc., Pioneer Thermal has own R&D team who can design and run simulation for you if you require design service, or assist your design team to improve the part feasibility from the manufacture point of view (design refine/process optimize/cost reasonable). If you need any heat sink service, please contact Pioneer Thermal.