There are many types of heatsinks, including different materials, different shapes, sheet, tubular, and different water inlet and outlet methods. However, different heatsinks also have special requirements in terms of installation.
The heat sink temperature control valve is an automatic control valve installed on the heat sink.The heat sink thermostatic valve is a proportional regulating control valve that can work without external energy. It regulates and controls the indoor temperature by changing the flow of heating hot water. It is an economical and energy-saving product.
Copper-aluminum composite heat sink is a type of copper water channel heat sink, which mostly adopts the "double water channel" method. Although the thickness of the heat sink is increased, the heat dissipation effect is more ideal.The heat dissipation of the three-dimensional double water channel heat sink is 80% higher than that of the traditional single water channel heat sink; the optimized convection space reduces consumption and resource consumption when the heat dissipation is equal.
During long-term use of the heat sink, corrosion problems may also occur.Corrosion of the radiator means that the surface or interior of the heat sink is corroded by chemical substances, resulting in a decrease in the heat dissipation effect of the heat sink. Corrosion will not only affect the service life and performance of the heat sink, but may also lead to equipment failure and safety hazards.
Most heatsink will make noise during use, but the fan speed of the water cooling system is lower and the noise is smaller, making the entire computer quieter.
The light pipe heat sinks adopts convection heat dissipation method and has a fast heat dissipation rate. The temperature can generally increase within a few minutes after the heat sinks is turned on. It is a low-carbon and energy-saving heat dissipation device.
Copper-aluminum composite heat sinks is a radiator designed for high-power electronic equipment.Copper plates and aluminum plates are combined using special bonding technology to form a high-strength metal material with high heat dissipation efficiency and corrosion resistance.
Speakers are becoming more and more intelligent, and the number of internal circuit components is increasing, causing the speakers to generate higher temperatures when in use.If used for a long time and the heat dissipation is poor, the internal circuit components of the speaker will be damaged or even burned, posing certain safety risks.
Double-sided IGBT Power Module Heat Sink Design Manufacturer
Carbon fiber heat sink makes batteries safer for electric cars, bikes, and more. So, batteries have come a long way in recent years. Lithium-ion batteries in particular are more powerful, longer-lasting, and smaller—and they are powering ever more devices, from smart watches and phones to electric cars, and even electric-powered aircraft.
The CPU heat sink will oxidize after being used for a long time. This is because the surface of the CPU heat sink will be exposed to oxygen in the air. The oxygen in the air will react with the metal surface to form oxides. These oxides will cause the CPU heat sink to become oxidized.
Heat pipes do not actually dissipate heat and are therefore incorporated into many different types of heat sinks as assistants. A heat pipe is a copper tube with an internal wick structure that is sealed at both ends and has a small amount of water inside.
Pioneer Thermal is a professional custom heat sink manufacturer in the cooling system field. With the goal of providing advanced thermal engineering and design services to customers.
The heat pipe Heat sinks consists of a sealed tube, a liquid wick and a steam channel.The liquid-absorbing wick surrounds the wall of the sealed tube and is immersed in a volatile saturated liquid.This liquid can be distilled water, ammonia, methanol or acetone, etc.Heat pipe radiators filled with ammonia, methanol, acetone and other liquids still have good heat dissipation capabilities at low temperatures.
The twin tower structure air cooled heat sink adopts a 6-heat pipe dual-tower design with a tower height of 157.5mm. It is suitable for most mainstream chassis.