Pioneer 5G electronic heat pipe Heat Sink

The advancement of the 5G era is in full swing. Compared to 4G networks, 5G transmission rates are hundreds of times faster, but power consumption will increase and the thermal value will rise. Momentum and heat dissipation, has always been highly concerned problem, electronic products with 5 g phones, people is higher and higher demand for mobile phones, mobile phone hardware configuration from a single-core to dual-core CPU in gradually increase to four, eight nuclei, screen size and resolution are also rising. And mobile phones hardware and performance improvement is hot more and more serious problem, if not timely heat out will lead to cell phone hot, caton, crash, explosion and other problems.

                                                                         

Heat pipe Heat Sink is the use of actuation fluid phase change, fast heating end to the other end of the cooling, to borrow from capillary structure from cooling end back to the heat end and achieve continuous heat transport.Micro heat pipe for evaporation section at the end of the transfer (heat), on the other side of condenser (heat), when the heat pipe evaporation by capillary suction liquid working medium evaporation of liquid core, "hot" and "cold" in evaporation condenser pressure difference between driving steam flow to the condenser, and throughout the year. Back into the liquid working medium, driven by capillary force of flow along the structure from the condenser to evaporate. So circulates, heat the tube at one end to the other end.For electronic products is through the principle of the thermal interface materials from the heat production device will heat to the Heat Sink, heat will eventually spread to the external environment, decrease the temperature of electronic products.
Pioneer heat pipe Heat Sink: Main Process Extrusion Bonded Fins Skived Fins Snapped Fins Folded Fins Heat Pipes Cold Forging Die Casting FSW cold plate Gun drill cold plate Vacuum brazing cold plate Vapor chamber, Finishing Processes CNC machining Drilling Tapping Stamping Anodizing Screen printing Powder coating Laser etching Polishing Electrophoresis E-coating,  Finishing Value Added Embedded fans Thermal Greases Screws Springs Clips Embedded heat pipes Phase change materials Back plates Gap filler pads PEMs Standoffs Dielectric pads Compounds.                                                                                                                  
Pioneer Thermal has more than 19 years experience in heat sink design and manufacturing, our process includes CNC machining, cold forging heatsinks (also known as pin fin heat sink), cold plate heatsinks, die casting heatsinks, extrusion heatsinks, heatpipe assemblies, skived fin heatsinks, stacked fin heatsinks, folded fin heatsinks etc. If you need any heat sink service, please contact Pioneer Thermal.